Fluna Gun Degreaser

Special Degreaser & Cleaner

Fluna Gun Degreaser is a special Cleaner and Degreaser for the removal of oils, fats, waxes, etc.

Fluna Gun Degreaser also cleans metals from powder residue, black powder, combustion residues,

dust, sweat, etc.

Properties :

 Cleans residue free and degreases in one step

 Simple use, don ́t harms rubber and plastics

Application :

Degreasing :

Drop Fluna Gun Degreaser onto the appropriate spot and spread with a dry cloth and wipe off.

Existing oils and greases are removed immediately and without residue. Repeat the process several

times until the surface is completely degreased.

Barrel Cleaning :

Before Fluna Gun Cleaner or Fluna Bore Pro (Barrel Cleaner) is applied, the barrel should be clean

and dry from powdery mildew. Use Fluna Gun Degreaser for this. Put this on a clean felt plug and

push it through the dirty barrel from the cartridge chamber. After using Fluna Gun Cleaner or Fluna

Bore Pro and rubbing the metal with a bronze or brass brush, the barrel should be wiped with Fluna

Gun Degreaser from the cartridge chamber until no more fouling is visible on the felt plug. The

barrel is cleaned and degreased at the same time and can be coated again with Fluna Gun Coating.

Cleaning Rifle- and Pistol parts :

Drop Fluna Gun Degreaser onto the soiled surface and let it soak in for a short time. If necessary,

use a brush to remove the dirt and wipe with a cloth. After cleaning, the surface is simultaneously

degreased and prepared for coating with Fluna Gun Coating. Fluna Gun Degreaser does not attack

varnishes, rubber or castings. Fluna Gun Degreaser can be used in ultrasonic bath ́s as well,

recommended dilution is 1:10